Starting watercolor coloring pages takes far less than the art store suggests. A small set of paints, two good brushes and the right paper will carry you through every page in my library, from a simple cottage door to a lighthouse in a storm.
When people write to me saying watercolor "just doesn't work" for them, the cause is almost never talent. It's nearly always the paper, the printer ink, or a brush that can't hold a point. So here's each piece of the setup, what to look for, and what you can safely skip.


The best paper for watercolor coloring pages
If you buy one good thing, make it the paper. Watercolor is mostly water, and the paper has to hold that water without falling apart. Regular printer paper is about 80 gsm. The moment it gets wet it curls into hills and valleys, the paint pools in the dips, and the surface starts to pill if you brush over it twice.
Look for watercolor paper marked 140 lb / 300 gsm. That weight takes several layers of paint and still dries reasonably flat. You'll also see three surface types:
- Cold press has a gentle, even texture. It holds water evenly and forgives small mistakes. This is the one I recommend for coloring pages.
- Hot press is smooth. Fine lines print beautifully on it, but washes dry faster and show streaks more easily.
- Rough has a strong grain. It's lovely for loose landscapes, but it breaks up printed lines and makes small details hard.
Paper is also sold as cotton or as cellulose (wood pulp). Cotton stays wet longer and is gentler with layers, but it costs more. A cellulose student pad is perfectly fine for learning; save cotton sheets for a page you plan to frame or give as a gift.
If your printer won't take paper that thick, heavy cardstock (110 lb or more) works too. Use a little less water, paint in smaller areas, and expect some ripple. Mixed-media paper sits in between: it handles light washes better than cardstock and usually feeds through a home printer without trouble.
For more on paper weight, cotton and texture, see Watercolor Paper Explained.
How to print coloring pages for watercolor
Every set downloads as a PDF sized for both A4 and US Letter. When you print, switch on Fit to page so nothing is cut off at the edges. Feed watercolor paper one sheet at a time, and check your printer's manual for the heaviest paper it accepts. Many home printers have a rear tray or a manual feed slot that takes thicker sheets more easily.
Test your printer ink first
Most home inkjet printers use water-based ink, and wet paint can lift it and smudge the lines into gray halos. Laser printers fuse dry toner onto the paper with heat, so their lines stay crisp under water.
It's worth the two minutes. There's nothing quite as disappointing as a lovely first sky wash that drags every printed line into a blur, and it happens to almost everyone who skips this test once.
- Print the page and let it dry for at least a few hours. Overnight is safest.
- Brush a little clean water across one line near the edge of the page.
- Blot it with a paper towel and look closely.
- If the line stays sharp, you're ready. If it blurs, print the page at a library or copy shop instead, where laser printers are standard and a page costs very little.

You can also print on regular paper and trace the drawing onto watercolor paper with a light box or a sunny window and a soft pencil. It takes longer, but it gives you the full choice of paper.
Watercolor paints for beginners
A student set of 12 colors is plenty to start. Pans (the little dry cakes) are compact and tidy. Tubes give you more paint at once and are easier for large skies. Either is fine.
Quality matters more than format. Choose a recognized artist or student brand over a toy set. Cheap paint is mostly filler; it tends to look chalky, dries unevenly and fades in sunlight.
If you'd rather build your own small palette, these six colors cover nearly every page in my library:
| Color | A common paint to look for | What it's for |
|---|---|---|
| A warm yellow | Hansa yellow deep or cadmium yellow | Sunlight, flowers, golden fields |
| A blue | Ultramarine | Skies, sea, shadows |
| A soft red | Pyrrol red or cadmium red light | Roofs, roses, lighthouse caps |
| A green you like | Sap green | Gardens and hills, softened with yellow or red |
| A brown | Burnt sienna | Stone, wood, paths, tree trunks |
| A dark gray | Payne's grey | Rocks, slate roofs, deep shadows |
Wet your pans with a drop of clean water a minute before you start. It softens the surface so the brush picks up color without scrubbing. When you're ready for a more flexible palette, A Six-Color Watercolor Palette shows how warm and cool primaries mix almost anything.
Watercolor brushes: you only need two
Start with two synthetic round brushes: a size 8 for skies, walls and other larger areas, and a size 2 or 4 for windows, flowers and small details. A round brush is the most useful shape you can own. Pressed down, it lays a wide stroke; lifted onto its tip, it draws a fine line.
Synthetic brushes are affordable, hold a good point and are easy to care for. Natural hair brushes hold more water, but you don't need one to paint beautifully.
When you shop, look for a brush that springs back to a sharp point when wet. After painting, rinse it in clean water, wash it gently with mild soap, reshape the tip with your fingers and let it dry lying flat. Never leave a brush standing tip-down in the water jar; it bends the point for good. Watercolor Brush Control covers how to hold and use them.
The small things that help
- Two jars of water: one to rinse dirty brushes, one kept clean for mixing
- Paper towels or a soft cloth for blotting your brush and lifting color
- Low-tack painter's tape to hold the page flat on a board
- A board or stiff piece of cardboard a little larger than your page
- A white plate or palette for mixing
- A scrap of the same paper to test colors before they touch your page

What you can skip for now
You don't need masking fluid, white paint, a dozen brushes or expensive cotton paper to begin. Masking fluid is useful later, but on a coloring page the printed lines already show you where the whites belong, so you can simply paint around them.
Setting up your space
Work near good daylight if you can, and keep everything within reach before you wet the first brush. Watercolor moves on its own timetable; when a wash is drying, you won't want to stand up and look for a towel.
Tilt your board slightly by resting the top edge on a book. A gentle slope helps washes flow downward evenly instead of pooling.
Your first ten minutes
Before you start a full page, fill a scrap sheet with small squares. Paint one color as strong as you can, then add water and paint it again, and again, until it's barely there. Paint one square wet into a damp square beside it and watch them blend. Ten minutes of play like this teaches you more about your paints than any guide can.
Frequently asked questions
Can I use regular printer paper for watercolor coloring pages?
You can, but it will curl and pill as soon as it gets wet. For real watercolor, print on 140 lb / 300 gsm watercolor paper, or on heavy cardstock of 110 lb or more and use a little less water.
Will my printer ink run when I paint over it?
It might. Most inkjet ink is water-based, so let the page dry overnight and test one line with clean water first. Laser-printed lines don't run, so a library or copy shop print is a safe alternative.
What size are the coloring pages?
Every page fits both A4 and US Letter. Choose Fit to page in your print settings and nothing will be cut off.
Keep learning
- How to Watercolor a Coloring Page: 9 Easy Steps, once your supplies are ready
- Watercolor Paper Explained, if you're still choosing paper
- How to Paint Watercolor Skies and Sea, a good second page to try
- Watercolor for Seniors, for a setup that is easier to see and easier to hold
Not sure if watercolor is for you? Try my 8 free watercolor coloring pages before buying anything else. It's a gentle way to test your paper, your printer and your paints all at once. When you're ready for a full set, 84 Simple Houses is the one I made for beginners.





