Trees turn up in almost every cottage scene, framing the house, filling the background or arching over a garden path. They're also easy to get wrong in one of two ways: a flat green lollipop, or a tree fussed over leaf by leaf until it looks like a lump of moss.
I've painted plenty of both. The moss version was my specialty for a while: I'd dab in individual leaves for half an hour, each one a slightly different green, and step back to find a dense, dark blob with no light in it at all. What fixed it was thinking in three layers, light, middle and dark, and stopping there.

New to painting coloring pages? Start with my step-by-step guide on how to watercolor a coloring page, then come back to this one.
Why three layers?
A real tree is a rounded mass of leaves. The side facing the sun is bright and yellowish, the middle a rich green, and the inside and shaded side dark. Paint those three values and the tree looks round and solid. Paint it all one green and it looks flat, however many leaves you add.

Layer 1: the light
A pale wash of yellow-green, mixed from lemon yellow and a little sap green, over the whole shape of the tree. Keep the edge bumpy and irregular rather than a smooth outline, and leave a few small gaps of white paper or sky inside the shape. Trees are never solid.
Layer 2: the middle
While the first layer is still damp, drop a stronger sap green into the middle and lower part of the tree, away from the light. It blends softly into the first layer. The sunny top and edges stay pale.
Layer 3: the dark
Let everything dry. Then, with a dark green made from sap green and a little ultramarine or Payne's grey, paint the shadow side and a few clumps of shade inside the tree. Use small, broken strokes, like groups of leaves, not a solid patch. Add the trunk and a few branches peeking through the gaps.
This layer is what makes the tree three-dimensional, so be brave with it, but keep it to the shadow side. That's where my moss blobs went wrong: dark everywhere means no light anywhere.
How I painted the trees behind the washing day cottage

The sky went in first: a soft cerulean with white paper left for clouds, as the color guide suggests. Once it was dry, I painted the trees on each side of the cottage in pale yellow-green, with bumpy edges and small gaps of sky, working carefully around the roof and chimney.
While that was damp, sap green went into the lower part of the trees, closest to the house, and blended softly upward. When it had dried, I added a few small clumps of darker green on the shaded sides, just behind the roof line. That dark behind the roof is what makes the white walls and red roof come forward.
The trees have no outline at all. They fade into the sky, which keeps them sitting behind the house.
Then the cottage: the roof in cadmium red, the shutters cerulean, the grass a wash of lemon yellow and sap green. The washing went on last, as the color guide recommends: one bright dab of a different color per garment.

Background trees are simpler
Trees behind a cottage should be softer and simpler than a tree in the foreground. I often give background trees only the first two layers, wet-on-wet, a little cooler and paler so they sit back. A simple, soft tree behind the house makes the house itself stand out. It's the same idea as in Creating Distance with Softer, Cooler Color.
Different trees, same method
- Round oaks and apple trees: keep the clumps of leaves round and generous.
- Tall poplars and cypresses: a narrow shape and upright strokes.
- Pines and firs: short downward strokes in tiers, like a stack of skirts, darkest on the underside of each tier.
- Fall trees: swap the greens for ochre, orange and rust, and leave plenty of sky holes.

Common tree problems
| What you see | Why it happens | What to try |
|---|---|---|
| Tree looks like a lollipop | Smooth round outline | Make the edge bumpy and irregular |
| Tree looks flat | One green all over | Paint light, middle and dark layers |
| Tree looks heavy and solid | No gaps, or dark everywhere | Leave sky holes; keep the dark to the shadow side |
| Background trees jump forward | Too dark and detailed | Keep them paler, cooler and softer |
| Greens look dull | Overmixed or too much gray | Mix fresh greens from yellow and blue |
Frequently asked questions
How do you paint trees in watercolor for beginners?
Paint the whole tree in pale yellow-green, drop in a stronger green while damp, then add dark green on the shadow side once dry.
How do I stop my trees looking like lollipops?
Give them a bumpy, irregular outline, leave some sky holes, and show a little of the trunk and branches through the leaves.
Should background trees be detailed?
No. Keep them soft, simple and slightly paler and cooler so they stay behind the cottage.
Practice pages
The 30 Country-Style set has cottages framed by trees, hedges and hills, perfect for practicing the three-layer method.
If your tree greens all come out the same, Mixing Greens in Watercolor has the mixes I use for light, middle and shadow.





